April 20, 2023
Description
These are handcraftet original made Caña from a real spanisch craftmen and Family of Flamenco dancers. This instrument is meant to reprudice the human clap, and be able to have a higher repetition. This is a very special southern instrument. You will need 2x M4 Screws and 1x m3 screw, both with nuts. Have fun with this! To get the Real deal print 100% infill with Wood Filament, and best with the thinnest layers to get nice look. You will need support.
Normally this is done with s single piece of bamboo. Also this is the short version to have it printed on one bed. It can go as long as 75cm.
Have fun playing with your Caña
You can also hear an example here, on how it sounds:
License:
Creative Commons — Attribution — Noncommercial
9
Surfalex2000
