April 27, 2023
Description
I bring you this amazing Planter from Nintendo World in 2 colors for single extruder printers! Super easy!
Great size at 100%, 10.7 cm tall, but can be scaled up with no problem. It has 3 sides with the Question Block.
Includes draining hole, so just put your favorite plant and enjoy!
Just print the Box in Yellow, then the 3x Question Mark and 12x Dots on White.
It's a me mario!!!
If you like this model don't forget to check this one out too:
If you like this model don't forget to check out my Patreon, where you can get access to my whole catalog of premium Stls, over 160, and be able to sell them with a Commercial license:
3D PRINTING SETTINGS
-It should print with no supports for most printers, even if there is some overhangs the Question will hide it.
-At 100% Box and Question marks will fit nicely.
-For the Dots print only 1 at 99%; if is too tight print a few smaller or if loose a bit bigger. But works at 100% for me on MK3.
-Thats it, have fun!
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
IK3D
