Collar Stiffener Card (x2) - EDC Kit

A 'collar stiffener only' version of my EDC (Emergency Debonair Card)

I had a few requests to make just the collar stiffeners, so I made a mini version that holds 2 collar stiffeners. There's also a larger credit card sized x6 version here.

Key Features:

Includes two shirt-collar stiffeners
Printed at 2.5mm thick, should fit in a spare slot in your wallet, purse of travel bag
And of course, features hexagons, because they are the bestagons.

Once you've popped the piece off the card, insert into your collar, and you're ready to go out looking your best

Hope you like it!

Print instructions

Slicer Settings
Using Prusa Slicer 2.3.0 Alpla-3 for this with;

0.10mm DETAIL default profile
Monotonic infill for the top layer
(though the basic settings in the main release should be fine)

Printer and Filament

Printed on a Prusa MK3s
Using Prusament PLA Galaxy Black
with Filamentum Extra Fill Traffic White for the inlay.

Note: I'd recommend not using a Silky filament for this - at least not for the first 1mm of the print - the additives in silk make it hard to snap off without damage.

Colour Inlay Effect

For a nice finish, you can add a colour change pause at the 2.10mm and 2.40mm height, to create a nice inlay effect.

Enjoy :)