Slipcase for Pi4B+PiSugar3

This Case was created by/for BiblioTech Sans Frontieres, consider supporting them please.

https://www.librarieswithoutborders.org/

New Version June 2024 larger, better cooling, better fit, easier assembly, etc

This case is for the Raspberry Pi4B and Pi Sugar3 UPS Hat.  Three piece case with an IOPlate that snaps over the IO.  Pi4B and PiSugar 3 should be assembled together with screws and standoffs that are supplied with the Sugar3 board with the 5000mah battery.

Integrated Button for Battery Status LED.

There are bosses and guides -like the IOPanel, that keep the board assembly in the right orientation in the case.  Careful assembly required.

Simple assembly attach the Sugar3 to the Pi4B (screws and standoffs supplied with Sugar HAT), snap on IOPlate over side IO, attach MicroSD to Pi4b, slide assembly into base and carefully push on cap.  Cap to Base partline is line to line no gap.

Model in images printed with Prusament PLA.