No modification led light housing/mount for Bambu X1C or P1P

3D GO

May 10, 2023

Description

This remix introduces some new capabilities and changes a critical part of the original model.

Cutouts for rubber feet on each end for friction so stays in place on the X1C glass top
On either end its now enclosed to retain the led at the perfect height
One end is now open so you can slide in a light

Due to the one open end you can now scale the correct axis to accommodate a longer light. Works with the same light from the original model.

Print Settings	Setting
Walls	2
Layer Height	0.2mm
Nozzle	0.4mm
Material	I used Asa but you can use any if you trust the heat wont deform or melt it
Infill	15%
Supports	Tree
Other	I clipped down my build plate to stop it lifting from the Asa warping