Perko Boat Compartment Latch Handle

This model is a replacement for a Perko compartment latch handle.  It was printed with PETG to resist the weather.  100% infill was used both for strength and to resist retaining water inside the part.  No supports are necessary for the build.

Use the washer and screw from the original handle in the replacement.  The hole for the screw is threaded in the model.  Do drill this hole or it will destroy the threads.  Don't over-tighten the screw because the screw has very few threads. 

The hole for the pivot/attachment pin was designed intentionally small which can be drilled to the appropriate size based on the type of pin that is used.