Pool Skimmer Net Adapter for Gardena Combisystem

I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed).  I needed a much longer tube holder with a larger diameter.  The skimmer net holder has a 3 CM/1.2 IN inner diameter and a total depth of 131 mm (104 mm after the pin holes).  It can accommodate all my pool skimmer nets and brushes. 

Because of the Combisystem connector, it wasn't possible to simply scale the entire model.  I ended up splitting the original model in 3 parts (first cut under the Combisystem connector, second cut above the skimmer holes on the handle).  I then scaled the middle section on the XYZ planes to reach the required diameter and depth.  I scaled the tip on the XY planes only, this was required to avoid having super elongated holes on the handle.  All this was done in Prusa Slicer!  The model fits by just 1 mm on a Prusa MK3/S+.

I printed the model with black PETG and a 0.6 nozzle.

This is a remix of the GARDENA Combisystem to Intex model by Geweldich.