January 3, 2023
Description
Cupcakes for Christmas?
Make them look even more fabulous with these Cupcake Wrappers!
You can download 5 different versions:
Instructions in the "Print instructions" tab.
Merry Christmas!
All files need to be printed with 0.2 layer height, no supports needed.
The gingies, snowflakes and the stars are super easy prints. Just place them on the buildplate and slice.
The trees and the sleigh need a supporting background. This file is called "infill".
Open both files together in PrusaSlicer as one file and set the "infill" file to 0 top and 0 bottom layers to print only the infill structure. (with an MMU2 you can use a different color as well)
It's all set in the m3f file, so you only need to change the infill to your liking. 🙂
Let the print cool down completely before removing from the buildplate.
To assemble it you just need to wrap it around and close it by inserting the nose on one side into the slot on the other side.
Place your cupcake in the middle - that's it.
Enjoy!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
DasMia
