Laserparametertest for Snapmaker an other lasers

This is a gcode-file which is burning several filled rectangles on your material.

I choosed to go from 10 to 100% in ten steps and for the speed I started from 300mm/min up to 3300mm/min in three hundred steps.

Be careful, some materials will burn away with the 10W-Lasermodule!

The projectfile can be edited in Luban and the gcode should work right without

adjustments on a Snapmaker A350.

I also added the 110 .json-files if you want to make your own set of settings.

You can import them one by one but that is a bit of pain in the arse. On MacOS, you can copy them to the right subfolder in /Users/$Your Username/Library/Application Service/snapmaker-luban/... On windows it is C:\Users$user\AppData\Roaming\snapmaker-luban\Config\laser

The pictures show the file burnt on a piece of slate and a plate printed with yellow PETG.

Category: DIY