1$ plastic piece for 2022 Snapmaker 2.0 Extruder

My second or third print on my brand new Snapmaker 2.0 caused a big mess. It formed a 100%-Infill-Blob around the Hotend. while taking it a part I saw a crack in the black plastic piece. You can get this spare part from Snapmaker for 1USD, thats a good price. However the shipping to germany is about 14USD. Now its a tough prize for a small plastic piece.

Long story short, I created this spare part out of measurements I took from the broken part.

V2 has the mounting holes 1.5mm raised, so the fan-output provides a better cooling of the extruded material.

V3 has the part cooling outlet modified, so the air is blown slightly under the nozzle. I hope I don't need more iterrations.

V4 - should be the one. I moved the mountingholes a little bit, so that the clearance from the parts an the nozzle-level is around 1mm.

If you have to disassemble your whole extruder, take pictures of every step - so you have a "reverse manual" to reassemble it afterwards.

I designed the screwholes a bit conical, so a M3-screw should fit into them and make a good connection. You can also melt M3-nuts from behind with a soldering iron like I did.

The Sketchup-file is also available in the files, so you can make changes or improvements. But I hope this was the last time I needed this part replaced.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0,16

Infill:

Filament: dasfilament PETG

Category: 3D Printer Parts