December 21, 2020
Description
I cleaned up a set of old Christmas baubles and have derived some new things from it. This is one of the older baubles and I test printed it with a 0.8mm nozzle but it should print just fine with small or larger nozzles too.
If you want a larger version, you can easily scale it up to a height of 200mm in the slicer, if you're using the ultra version. For larger versions you might want scale it in Fusion 360 first.
If you like this thing, you might want to check those too:
https://www.prusaprinters.org/social/3373-wilko/collections/37573
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.6
Infill:
0%
</div>Notes:
I printed this with a 0.8mm nozzle, but it should print just fine with smaller or larger ones too.
License:
Creative Commons — Attribution
9
Wilko
