December 23, 2020
Description
I cleaned up a set of old Christmas baubles and have derived some new things from it. This is one of the newer and I test printed it with a 0.8mm nozzle. You might consider to play a bit with the layer height for the bottom overhang to make it print even more easily but it might work without, too.
https://www.prusaprinters.org/social/3373-wilko/collections/37573
Printer Brand:
Prusa
Printer:
i3 MK3
</div>Rafts:No
Supports:
No
</div>Resolution:0.6
Infill:
0%
</div>Notes:
I printed this with a 0.8mm nozzle, but it should work with smaller nozzles just fine.
License:
Creative Commons — Attribution
9
Wilko
