Fiberlogy MasterSpool

Simple MasterSpool, remixed from E For Extrude to work with CatYarn spools, as well as a generic spool that can be used in a rewinder.

Printing Guide

• You more than likely want to be using Arachne perimeter generation when slicing, if not then force perimeters to have a width of 0.44mm
• Print just layers 3 and 14 (if printing at 0.2mm layer height) in an accent colour of your choice

Hardware (Per Spool)

M3 x 8mm SHCS/BHCS  - 12x (Optionally 6x and ideally BHCS)
Heatset Inserts     - 12x (Optionally 6x)