jaR2-D2 articulated mason jar lid

I remixed my own R2-D2 design to create this. That R2-D2 is also remixed from soozafone's fantastic Lucky 13 model. 

There are definitely more Star Wars themed lids out there to be made, a Jar-Jar Jar Lid perhaps or even a Darth Lidious. I'm just not sure I have it in me to make those. I feel like I've been slacking on my Mini 13 remixes and would like to get back to making them soon.

• If a part has [x2] in the file name, then you need to print two of that part
• I printed everything in PLA at a layer height of 0.2 mm and a speed of 100 mm/s.
• The middle foot is being held to the jar via magnets. I have a loose 4mm x 25mm magnet sitting in the bottom of the jar and I have another 4mm x 25mm magnet attached to Magnet Adapter.stl. If you plan on storing food in the jar, obviously you won't be able to use the middle foot.

ASSEMBLY: 

Assembly is straightforward. Head Grey.stl fits over top Head Blue.stl and they snap into Lid.stl while the “eyes” fit into the head and Lid Insert.stl into the lid as seen in the photo below.

You will need to connect Arm Blue.stl to both the Foot.stl and Lid.stl before sliding Arm White.stl over Arm Blue.stl.