June 18, 2023
Description
This is a simple Variantion on RYTEK 3Ds Bambu Chute and Allan Fonroques Remix of it. Following Allans approach to make the chute part printable without supports i modified it similarly but added three negative modifiers to glue in some magnets and prevent the chute from sliding away as easily.
The magnets slots are made magnets with 6mm diameter and 3mm height, but you can simply modify and reposition them in OrcaSlicer or BambuStudio according to your needs.
I added a drop of super glue just to make sure they don't pull out of the part.
Don't forget to print the bucket from RYTEK 3Ds cool design!
––––––
In line with RYTEK 3Ds original model CC BY-NC 4.0 license has been chosen.
––––––
Changelog:
2023-06-18: fourth magnet slot removed (no contact anyway because of the curvature).
License:
Creative Commons — Attribution — Noncommercial
7
Milan
