Open Source Organizer

This test model can be easily printed from Prusament PVB. It is a specially designed model for testing Prusament PVB samples.

Open Source Organizer for nozzles or screws inspired by the Open Source logo. The model consists of two parts - a container and a lid.

You can choose from two versions:

1) nozzle organizer

• ideal for 4 types of nozzles (eg 0.25, 0.4, 0.6, and 0.8 mm). Designed for E3D V6 nozzles.

2) screws and nuts organizer

• suitable for any small screws and nuts

The model is designed for 3D printing from PVB material, which is a special easy printing with good transparency. The printed PVB model can be easily smoothed using post-processing with isopropyl alcohol (IPA) to give the model a glossy look.

Design by Prusa Polymers

Print instructions

The whole model weighs approximately 28 g.

We recommend using any two Prusament PVB sample colors and printing a multicolor model. The attached g-codes include a color-change, so you will be prompted to change the thread.

STL
We recommend printing the model from PVB or PLA.

It is possible to use the default Prusa Slicer print settings for a 0.4 mm nozzle.

Recommended layer height: 0.15 - 0.2 mm
Perimeter: 2

G-code for Prusament PVB printed on the MK3/MK3S/MK3S+ printer.

Designed by Martin Horák.