SPUHR DOPE card holder

Dope card holder for the SPUHR optics mount. Light, adjustable and moves out the way when not needed.

 Im a lefty, so the pictures are on a lef handed rifle, but I uploaded mirrored versions as well. Print in PETG or carbon infused filament for temp stability. Many perimeters and 30% infill for max durability.

The actual dope card holder has two versions, the first is all in one, the second is from two parts to be able to make the plate out of a different material like carbon fiber.

Print:

1x Body 1 (left or right handed for the card to be on the left side of the gun)
1x Body 2 (universal)
1x Body 3 or Body 4

Hardware needed:

1. SPUHR orginal M4 screws (you should have enough extras when you purchase a new SPUHR mount) or any other M4 countersunk M4 screws.
2. M4 heatset inserts. You can also modify the design to accept M4 nylock nuts
3. Blue Loctite for the screws, this is really needed, as otherwise, the mount will keep loosening itself and wont hold in place
4. 3M hook and loop sticker
5. OPTIONAL 3mm carbon fiber plate, cut out a 52mm x 70mm rectangle and use to “Body 4” to mark holes. Then drill 2 4mm holes and round off the corners of the rectangle.