June 28, 2023
Description
Simple MOSFET corner frame mount for aluminum extrusions. I made this for my Anet A8 Plus, but it will work fine on just about any 20x20 / 40x20 / 40x40 frame. It can be mounted either vertically or horizontally, ideally in a corner to connect to a joint in 2 directions.
UPDATE 06262021: I added a version 2 of this model to support changes I made to my Anet A8 Plus. I needed for the MOSFET to the top of the base frame so I moved the mounting screws to a 90 degree offset, only keeping 2 of the three mounting screw holes. I also thickened the base from 2 to 3mm. Additionally, I raised the standoffs and opened the backing area to better support untrimmed through components. I'll add photos of the new mount once I've got it printed and installed.
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100%
Filament: Jinos 3D PLA Indigo
Notes:
The push pins are optional, the board can be screwed to the mount. Use of the push pins may require running a 7/64" drill through the holes.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
faultedlogic
