LCR-T4 Transistor Tester Tilting Case

This is a simple 3D printable model of the acrylic case I originally purchased with my LCR-T4 transistor tester.

This kit includes replacement parts for each of the clear acrylic parts that came with the acrylic case.

As with my GM328 printable case, this kit may be used in full, or for replacing individual acrylic parts of the original case, and requires the use of the screws, nuts, and nylon stand-offs that were included with the case.

This model has a detachable battery compartment cover, which allows for the replacement of the 9 volt battery without dismantling the entire case, and has a fold-able tilting stand for improved viewing angle.

The two small holes beneath the power/test button are for adding 4mm banana jacks which connect to 2 pins on the back side of the ZIF socket for connecting clip type test leads. Since this device performs only a single test and powers down, it doesn't matter which 2 pins the connections are soldered to, so long as they're electrically different. Use pins 1 & 2, 1 & 3, or 2 & 3.

Hopefully somebody will find this useful, either in full or in part.

Category: Electronics