Puzzle Presents #3

Gift Box #3

This is the third gift box in a series that may all look the same on the outside but each have a secret way of opening. 

This is the most simple but to some people the most tricky. To open this box, just rotate the lid counter clockwise to unscrew it. ;-) It seems simple but there are no clues how to open it and you would not think a square box would unscrew. Its roughly 100mm x 100m x 80mm tall.

Print Instructions
The bow and ribbons are printed separately and glued on. I printed all the parts in the orientation provided. I prefer the vertical orientation for the ribbons for a smoother surface finish, and they are much stronger printed in this orientation. I added helper pads to them to keep them stable during printing. For best results, use a .4mm nozzle. 

I used Gorilla Glue (aff.) for gluing on the ribbons.  Put the glue in the middle and let it naturally spread out. 

If you don’t already own as set of these clamps (aff.) you should pick them up, they really help with gluing the ribbons on. 

Printed on the Muldex rep-rap IDEX printer.