January 23, 2021
Description
This is a shelf that accommodates the wall mount of the Smart/RG Gateway SR515ac onto the newer SR516ac which is table mount only.
The assembly requires (3) 8-32 x 1 in screws and (3) 8-32 nuts.
The design software is written with OpenScad.
0.3 mm per layer for both the shelf and the clips, 20% fill
Support is needed only for the nut retainers under the shelf. The 3mf file already has the paint on supports using Prusa Slicer 2.3.0
License:
Creative Commons — Attribution
8
Startrekfan2
