This is a compact drying stand for a ResMed AirFit P10 for AirMini mask tube. Use two of them attached to each other (see model pictures) to prop up the end of the mask tube and let it drip dry.
A design feature is that the two pieces store almost completely flat for easy transport with your AirMini.
Printing instructions
- Print two copies of the .stl file as-oriented.
Operating instructions
- Slide the sides of the opening of one piece into the slots at the bottom of the other to prop it up.
- Gently insert the mask tube (frame down) into the top of the drying stand.
Safety warnings
- Follow the cleaning procedure specified by your CPAP manufacturer
- This stand is not meant to come in contact with any part of the device, mask, or tubing through which air passes.
Notes
- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification for another purpose (i.e., opening diameter, overall length, etc.), send me some measurements and I'll see what I can do.
Adam
