Dreame V9 Wall Mount Plates

I got a Dreame V9 today and of course also want to use the wall mount with the integrated charger, but don't like to drill holes into my walls. So i opted for the next best thing: double-sided tape.

The plates provide enough surface for the double-sided tape to stick to your wall properly, and can be fixed to the exitisting screw holes in the wall mount with M3x10 bolts (DIN 912, for a flush look).

Print two locks and each plate, no supports or fancy infill needed. I went with PETG to get good layer adhesion.

The pins on the plates are slightly offset to make sure the plates cover the ribs on the back of the mount, so make sure you orient them correctly. Which plate goes where should be obvious by the orientation of the pins.

Category: Organization