July 26, 2023
Description
I recently bought a "LED Power Supply" from eBay for my LiPo charger, and found the instructions and STL from bastian___ - but unfortunately that cover didn't fit my PSU, so i designed a new one.
The PSU has the model number DY01, accepts 100-240V AC and outputs 12V DC up to 400W, item 131148272815 on eBay. The eBay sellers specs are not quite correct, it has a width of 114mm and a height of 50mm.
I saw similar ones on DealExtreme, their dimensions (112x50mm) should fit, too.
Parts
I am using the following parts to add a power input, switch, XT60 connector and banana jack:
Input:Banana Jacks: https://www.voelkner.de/products/89911/Sicherheits-Einbaubuchse-260-Gseb-Rot.html and https://www.voelkner.de/products/89909/Sicherheits-Einbaubuchse-Seb-2600-G-Sw.html
XT60 Connector: https://www.voelkner.de/products/816169/Akku-Buchse-XT60-vergoldet-1-St.-Reely.html
You will need 2 additional M4 screws to mount the cover to the PSU (2 existing screws from the PSU will be used), and 2 M3 screws for the input socket.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
jangrewe
