SAMLA HANGA

SAMLA HANGA is a hanger for the very popular IKEA SAMLA storage boxes, allowing you to store 4-5 spools of filament without any screwing or drilling.

It is based on "IKEA Samla box as Filament Storage" by Gnevko, but doesn't limit you to a specific tube diameter.

The SAMLA HANGA snaps nicely onto the inner ledge of the handles, so make sure that you firmly push it (1) towards the outer wall and (2) down onto the ledge. Yes, a tiny amount of force is required, but that ensures that they don't fall off.

Parts:

• 1x IKEA SAMLA 22L (801.029.76)
• 2x SAMLA HANGA
• 1x 31-32m tube with a diameter of 1-4 cm (just make sure that it's thick enough to support 4-5 kg)

I am using a 2.35cm thick PVC tube (1m for for ~3.50€, cut into three sections of 31.5 cm each), which positions the spools with some nice clearance at the bottom.

2016-11-16: I've replaced the STL with a repaired version that doesn't have gaps and also added pre-sliced G-Code to print 2 SAMLA HANGAs with as little support material as possible (thanks to Simplify3D).

Print Settings

Printer Brand:

RepRap

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Notes:

This print needs quite a bit of support underneath, but you get a nice looking christmas tree if you manage to break it off in one piece. Such a nice christmas tree...

Category: 3D Printer Accessories