April 25, 2026
Description
This is a variable length, print-in-place, articulated bone-dragon.
Choose the version that you want, scale to your liking and print away!
(the one in the thumbnail is the 30-segment version)
Supports: None required!
Adhesion: Should print fine with a clean and well leveled printbed. Otherwise, a brim or raft will help but add post-processing work to clean up all the pieces.
Other than that: The rest is up to you. I printed mine in PLA with the standard Prusa profiles and it works great :)
Also check out the Keychain remix !
You may sell prints of this model commercially, but make sure to always link to this post here so people know they can print it themselves as well. Do not try to sell the files themselves, only prints.
Do not upload this model to any other platform! Remixes are only allowed on printables.com. If you see versions of this on any other site, it is uploaded there without my consent.
Note that DREMC is officially licensed to use this model for their advertising.
16.04.2026 - changed licensing
12.03.2024 - added the individual segments (head, body and tail) as seperate files so you can more easily create your own configurations and remixes. Note: on the versions I uploaded, the body segments taper down in size towards the tail, from 100% to 85% in 1% intervals (meaning the last 15 body segments contain the taper, unless the whole dragon is shorter than that, then I just increased the step size of the intervals)
30.01.2024 - added 250, 444 and 522 versions due to multiple requests for even longer versions
23.08.2023 - added 3MF files so you can multicolour print more easily
31.07.2023 - fixed the issue with the head segment being slightly stuck to the first body segment on versions 5, 10, 15 and 20
License:
Creative Commons — Attribution — Share Alike
kh4rj0
