Kaisi 126 in 1 Precision Screwdriver Set Mount

For use with Kaisi 126 in 1 Precision Screwdriver Set.

INSPIRED by Everything_3D's and SimonBBQ's Screwdriver Set Mount, but model is original.

I received the above screwdriver set with the intention of printing a hexbit holder to put them into. But I loved the rubber bit holders that came with the set and wanted to incorporate them into a holder. I also wanted the bit holders to be easily removed for remote work. I modeled this mount to use 6mm x 2mm x16 magnets to hold the bit holders in place. At the top right of the model is a miscellaneous place that I put holders for various other tools I have. The model is split in two in order to fit on a 220x220 build plate.

I left the back blank for you to add your preferred mounting option. I use a generic pegboard plate to superglue onto the back wall of the model, this allows me to get the alignment right without precise measurements during the modeling process. Put superglue onto the plate, put the plate up on your pegboard, then press the model onto the plate.

Tip: I cut the rubber holders out of the fabric pouch that came with the set. Then trimmed the excess rubber from around the holders.