Star Wars Fang Fighter print-in-place

The Fang Fighter is a mandalorian starfighter first seen in Star Wars Rebels.
This is a replica with rotating print-in-place wings.
Its scale should be somewhere around 1:270. I do not know the canonical size of this ship. (Wookiepedia says its 6m, but thats just way to small.)

For a stand/holder, its compatible with a slanted pin, peg and small base from here.

Print instructions

Rotate the model by -90° along the x-axis so that the nose points up.
I used 0.07mm layer height.
Needs Supports on buildplate.

I do not recommend changing the scale.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#

(Mini) Update

Moved the model around a bit so that a slanted peg attaches just at the end of the engines. This allows the wings to rotate freely even with a pin attached. (As can be seen in the pictures)

UPDATE [2023-09-21] Added stl with connector for stand