Ghostbusters Light Remix

I add Connectpoints to connect multiple Parts to make the light bigger and use for both Sides (on Window for example). 

The Hole on the bottom is 27mm for little Lamp Bases.

The Pins are 7,8mm big and long enough to connect 3 Parts. Maybe you need to underscale the Pins, if your Printer print bigger in measurement.

If you already printed the original you can add this Part with: Bot Part, mid Part and Connector for Original. If you only printed the colored Parts, you can use the optional top part.

Parts:

• Top Part (Edited from Original)
• Bot Part (Mirrored Top Part)
• Mid Part
• Connector Pin

Optional Parts:

• Connector for original
• Optional Top Part