Star Wars Rebels Phantom I

A replica of the Phantom I shuttle from Star Wars Rebels.
It has foldable print-in-place wings.
The scale is at 1:270 with a length of 43.1mm and a wingspan of 36mm. (The hinges are 2mm in diameter.)
Holder uses a small base and small pin from here.

Print instructions

You can print "star_wars_phantom_test" first to test your settings. This will only print one wing.
The wings should be printed horizontally, parallel to the printbed.
I do not recommend changing the scale.
I have used 0.07mm layer height and supports on printbed only.
If you want to use the holder, use the .gcode-file with peg or add a small peg before slicing.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#