vacuum adapters for DW735 Dewalt planer all common hose sizes

A collection on well fitting vacuum hose adapters for the Dewalt DW735 planer.

I have this planer and designed the adapters to provide a snug fit similar to that of the factor adapter.

Adapters that have a bend have 4 retaining position so the adapter can point multiple directions.

There are two samples included that can be printer to test the fit. 

Hose connectors :

• Each size has an option of Outer Diameter measurement or Inner Diameter. 
  • Outer Diameter (OD): Intended for the printed tube to go inside your existing hose.
  • Inner Diameter (ID): Intended for the printed tube to go over your existing hose or nozzle.
• 40mm long connector at each end
• 3mm taper on each connector, from -1.5 to +1.5
• Wall thickness of 2mm

The Magnetic Hose connectors are designed to connect to these adapters.

• 50mm magnetic hose connectors
• 100mm magnetic hose connectors

These were all generated with this OpenSCAD Parametric model. If any of these don't suit you can customise your own, or let me know and I can generate it.