2020 double profile cover

Now you can cover the space between two profiles of your printer.
Designed for constructions with 40mm spacing between popular aluminum profiles 2020.
Change only the height into a slicer and adjust the cover to your needs.

Print with 100% infill and sloowly. Flat surfaces don't like rushing.
I normally print 60 mm/s on my Kossel, these covers only up to 20 mm/s.

Do not use the brim method, because the contact of the two parts will be very visible.

Print instructions

Category: 3D Printer Parts Summary

Now you can cover the space between two profiles of your printer.
Designed for constructions with 40mm spacing between popular aluminium profiles 2020.
Change only the height into a slicer and adjust the cover to your needs.

Print with 100% infill and slowly. Flat surfaces don't like rushing.
I normally print 60 mm/s on my Kossel, these cover only up to 20 mm/s.

Do not use the brim method, because the contact of the two parts will be very visible.

Print Settings

Printer Brand: Anycubic Kossel
Rafts: No
Supports: No
Resolution: 0.15-0.2mm
Infill: 0% (vase mode) or 100%