February 18, 2021
Description
This cover clips into the Einsy case and supports a buck converter board. Wire the board input into your 24V power terminals on the Einsy, and set to 5V and wire the output to a Raspberry Pi 3 B+ or 4.
PARTS
LM2596 DC-DC Buck Converter
M3 Nylon Black Hex Screw Nut Standoffs
This and some wire and the cover is all you need to bring the buckboard onto your printer. You can use this to power any peripherals up to the power draw of your buck converter. I chose to power a Raspberry Pi 3 b+ and TFT Touchscreen running Octoprint, pictured.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
mcfada
