X-Max-3 Dry Box Side Holder

Re-locate your Qidi Dry Box from the back of your X-Max-3 to the side!  It also has slots to store the spacers that came with it (Spacers for smaller diameter spools to keep it centered)(Please download file “w-spacer slots” in the name)

No tools or hardware required!  It simply fits under the X-Max-3 and becomes secured to the side of the X-Max-3.

Easily remove the Dry Box to change filament and simply reinstall.  Better access to the Dry Box!

I recommend adding approximately 400 mm of Capricorn Teflon Tube PTFE Bowden (Amazon.com: Creality Official 1 Meter Capricorn Teflon Tube PTFE Bowden Tubing 1.75mm Filament, Low Friction for Ender 3/3 Pro/3 V2 Ender 3 Neo/3 V2 Neo/3 Max Neo Ender 5/5 Pro Ender 5 S1 CR-10 CR-6 SE 3D Printer : Industrial & Scientific)

Not sure if this will work with Qidi's X-Plus-3 because I don't have one to try it on.  If you own a X-Plus-3 and find out that it does work, please let me know!

Two different versions are located in the file section.  One that has the spacer slots and one without them.  

Hope this helps!