Cable Tie (Zip Tie) Holder/Organizer

I wanted to organize my storage shelf, so I created this simple Cable/Zip Tie holder.
It is designed to be printed in Vase Mode for a quick print with little material (why waste hundreds of grams of precious PLA, just to hold a few zip ties, right?).

It probably won't stand up to a lot of abuse though, so keep that in mind.

I printed mine using a 0.4mm nozzle, with an extrusion width of 0.6mm, just to give it a bit more weight and thicker walls.


I've added three designs, one with a larger, square base, one with a “cloud” base and one without any base at all.
I suggest printing it with one of the bases to ensure the “towers” are somewhat well connected, and to give it a bit more bottom weight, making it less likely to tip over.


The towers' dimensions are as follows (H = Height):
- Ø60 mm, H225 mm
- Ø55 mm, H175 mm
- Ø45 mm, H150 mm 
- Ø40 mm, H75 mm


Enjoy :-)


Created with parts in Prusa Slicer.
Let me know, if you need different dimensions.