"Not The Benchy" in a bottle (SC)

If you have no ideas, transform the work of others. And I really had no idea for a while. At least not a single one that turned out into something usable.

So I've redrawn the Benchy (kind of) and put it in a bottle.First it looked like and impossible print, but it might be very possible to print this without a cut.

This thing is currently "Work in progress". I've checked clearances and did some test in the slicer but I haven't printed it yet.

Update:
--------------------------------------------------------------------------------------------------------
2021/03/02: Easier printable version of the bottle added
 

You can find the multicolored version here: https://www.prusaprinters.org/prints/57058-not-the-benchy-in-a-bottle-multicolored-version

Print instructions

Print Settings

Resolution:

0.2mm

Infill: 

Doesn't matter

</div>

Notes:

• Only the liquid needs infill
• The bottle may be printed in vase mode and you may want to pause the print when the thick part of the bottle is done so you can insert the liquid and the "NotTheBenchy".