Spinning Finger Top & Reversed Top

These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw.

You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping the axis not to break one of the arm).

I add a intern brim for the central axis. It is easily removable and avoid unsticking axis.

To improve the spinning : 

• Cut the point with care : the point must be centered. Keep it as long as possible. 
• The axis is hexagonal so there are 6 different positions. Search for the position creating less vibrations.

Reversed Top :

This top is made to be launched on sharp objects such as pencils or toothpicks.

Print Settings :

• Printed on MK3S
• Filament tested : PLA
• Nozzle 0.4mm : 0.15mm and 0.20mm tested

Prusa Slicer 2.3.0