November 9, 2023
Description
Coasters showing the insignia of several factions from Star Wars. The coasters are 2mm thick and 80mm in diameter. The designs are:
Printed at 0.2mm layer height.
All designs are added as a negative volume. In PrusaSlicer, this is done by: Load “base.stl”. Right-click on base, select “Add negative volume”→"Load…". Then choose your design.
Use filament changes for colors. Start with the base color, switch to the second color at about 1.4mm, then back to the base color at 1.8mm.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
License:
Creative Commons — Attribution
DanielAlex
