quick vase mode screw container with 1/3/4/5 compartments and a twist

I needed a small container for some small parts (screws and nuts), so I added some dividers to my vase mode screw container. And then I thought of a way to let you choose the number of compartments (1/3/4/5) in the slicer with one model using some vase mode tricks instead of having 4 separate models. 

There are models with 60mm and 80mm diameter (the photo shows the 60mm version).

I also made some mini tweezers to get the screws/nuts out.

Printing:

• Use vase mode of course.
• Set the extrusion width to 0.6mm. (in print settings → advanced)
• Choose the number of compartments by setting the slice gap closing radius (also there) to
  • 0mm for 5 compartments
  • 0.005mm for 4 compartments (as shown in the photo)
  • 0.01mm for 3 compartments
  • 0.02mm for 1 compartment (no dividers)