September 24, 2023
Description
Based on a “dog poop bag" holder, but supersize! I recommend printing without supports (supports are part of the model) and with at least 3 perimeters.
There are holes on the inside for you to mark the wall with where to put the screws (stick a pen through the hole). You can also tighten the screws with a screwdriver through that hole.
Alternatively, you can hang it with “Command Strips” or VHB double sided tape.
.3mf and .step files available.
License:
Creative Commons — Attribution — Noncommercial
8
mpodella
