Winder cable tidy (6 sizes)

What's this?

Wind up cables, string or ropes of all lengths and sizes with this simple print.

6 different sizes included from 60mm to 126mm (distance between tips of the prongs).

How to print

I used a 0.3mm layer height, 40% infill and no supports.

Printed vertically as shown in the render, however I'm sure it would also work on its side without supports (this may also be a bit stronger due to the layer orientation).

The photos show the largest 126mm winder.

Two versions of the winders are included: one set of STL files with screw holes (numbered 1 through 6) andAll sizes WITHOUT screw holes.stl which contains the same 6 winders but screw holes removed (so you can add your own, glue them to something etc).

The screw holes have a diameter of 5mm + a 2.5mm chamfer.

Category: Organization