September 23, 2023
Description
Print your very own “Demon Core” with a 12mm ball bearing. Modeled using historical photos. Screwdriver not included!
Two versions:
PRINT OPTIMIZED- Some minor features excluded to allow for easy FDM printing in the supplied orientation.
DETAILED- More difficult to print; may require support material unless your printer is tuned well.
The smaller the layer height the better. A 0.1mm or 0.15mm will yield better spherical features. The stand has some minor differences from the original as they would be almost impossible to print at this scale.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
TheCafeRacer
