Angle Connector (50x50x50x5x5)

Depending on what you want to build this plastic one might replace metal original.

Sides: 50mm x 50m x 50mm
Thickness: 5mm
Hole diameter: 5mm

hashtag uploading old stuff

If you like this little thing, you might also want to check these things: https://www.prusaprinters.org/social/3373-wilko/collections/36013

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.2mm (doesn't matter)

Infill: 

5% - 20%

Notes:

If you want stronger parts, increase the number of perimeters and the top / bottom layers. You might also want to print it laying on the side.You can find more information about this topic here:

Category: Replacement Parts