September 24, 2023
Description
A collection of trays in different sizes. Useful for organizing screws, Legos, crafting parts (like fusion beads) and much more.
The trays can be stacked inside each other when not in use.
The trays have holes on the sides where magnets with can be glued in, with diameter Ø6mm and thickness 2mm. These are the same magnets that are commonly used for the Gridfinity system. If you don’t have such magnets, they are inexpensive when ordered online, e.g. from AliExpress (search for “neodym magnet 6x2”).
When gluing in the magnets, please pay attention to their polarity. The holes for all the magnets are labelled with N or S (stands for North- or South- Pole). I have also included a small magnet orientation tool, that consists of two parts that can be printed in different colors and glued together. Theoretically, you can use a compass to figure out which the north and south pole is. But it does not really matter if you are using the same sides consistently.
I found that a gel-like superglue (CA glue) works great.
Recommended print settings:
License:
Creative Commons — Attribution — Noncommercial
8
Plastic Flow
