Folding laptop / tablet stand (print in place)

Summary

Ever needed to prop up your laptop or tablet at a more comfortable angle. This compact folding stand will prop up the laptop or tablet at approximately 18 degrees.

The stand folds down to approximately 8.5 inches (220mm) x 0.75 inch (24mm).

This is commercially available to purchase as well. But why not try printing one yourself :)

This does require well calibrated printer due to the tight tolerance. There is an 0.4mm air-gap and do not use supports for this print. This took 9h55m at 0.2mm layer height and 15% infill.

Happy printing :)

Print Settings

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 15 - 20

Filament material: PLA