October 12, 2023
Description
This part fits very snuggly on a can of Dr. Wack chain lube spray for motorbike chains. I would guess that these cans are standardized, so chances are that the shield works for other brands a well. If not, scaling can be a way to make it work anyway.
Printing this part is very easy. No brim or supports are needed. I recommend PETG due to its flexibility, PLA is not tested. Use 4 perimeters, that makes sure that the ring is printed completely concentrically. A layer height of 0.2mm is totally fine, even more should be possible.
Your satisfaction is my reward. Please leave a like an/or a make if you like this design.
Happy printing!
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
9
HD_Creator
