Use your phone or tablet together with your laptop as a second screen.
Can be stretched/shortened to fit laptops of different sizes.
Print profiles included.
Differences between versions:
- Macbook version - use this version if you have a laptop with keyboard and thin screens:
- Fits laptop screens between 290-330mm wide and up to 5mm thick (or thicker if it has rounded edges)
- Has a cutout for screen on top to fit more stably
- Fits closer to the screen since there is no “backstand”
- Microsoft surface version - use this version if your laptop/tablet has a wide kickstand at the back or a very thick screen
- Fits tablets or laptops between 260-300mm wide and up to 9.5mm thick
- Has cutouts for power/volume buttons (so the buttons are not inadvertently pressed)
- Can be used with backstand deployed (shorter side guide and positioned further from screen to not interfere with backstand)
If you have a different size laptop, let me know and I can make new versions in other sizes.
Print instructions:
- Tested with 0.4 nozzle.
- Tolerances of 0.2mm are ideal (check with tolerance test), but 0.3mm may work with a little effort.
- Part-(1) needs a small support at the bottom, all other parts can be printed without supports. The support side is not visible when using, so the finishing is not important.
- Brim recommended to avoid warping in long and thin parts unless you have really good bed adhesion.
- Tested with 3 walls and it was strong enough.
GiskardReventlov
