Desktop Disc Golf Set

The desktop disc golf set prints with no supports and requires minimal supplies from your local craft store or online(craft store will likely be much cheaper). 

Bill of materials: 

Eight 23mm cable chain strips (I used 7mm cable chain) 

https://www.amazon.com/DanLingJewelry-Stainless-Unwelded-Necklace-Accessories/dp/B085BRLTKW/ref=sr_1_33?keywords=hobby%2Bcable%2Bchain&qid=1696893800&sr=8-33&th=1

One keychain ring

https://www.amazon.com/Pieces-inches-Keychain-Keyrings-Attachment/dp/B07MV2XWQ6/ref=sr_1_6?crid=7HMCZCSK8SO3&keywords=Keychain+Ring+1+inch&qid=1696893421&sprefix=keychain+ring+1+inch%2Caps%2C97&sr=8-6

One 3/8 inch x 12 inch wooden dowel rod

https://www.amazon.com/Wooden-Unfinished-Hardwood-Sticks-Making/dp/B01BG8A8G0

If you do not want to buy the rod, chains or keyring, I am sure you can print them.

Assembly after connecting the chains is very simple, as shown in the pictures:

1: Pry open segments of cable chain to obtain eight 23mm cable chain strips

2: Attach the pried open cable chain to the inside rings on the top piece

3: Connect ends of all cable chains to the keyring

4: Place the dowel rod in the bottom

5: Slide the basket on the dowel rod

6: Slide the keyring on the wooden dowel rod followed by the top piece

7: Throw discs into basket