Borderlands Bandit Room Clener Shotgun

This is a 3 Barrell Shotgun from the game Borderlands called the Bandit Room Clener
Yes that is how they spelled it.

There are a lot of parts to this prop but the assembly is not difficult.
Video of the assembly can be found here

There was an extra part added after the assembly video was made that is completely optional, and its the display in the back of the scope.

Support me on Patreon:

Print instructions

Most parts do not need support, use your judgement.
I did orient all the parts in the way I believe it is best to print them to reduce support and or get the best quality.

Print one of each of the STL provided.

You can use PVC pipes instead of printing the barrels and back support pipe sizes are
Lower Barrel is 1.5"
Top Barrell is 1.25"
Support Pipe is 3/4"

If you decide to print the barrels they are 3 barrels total, but each barrel is split into 2 for print-ability.
I have included the files for all so as long as you print one of each file you should be ok.
The barrel plugs are used to join the barrels half's together