November 9, 2023
Description
A replica of the TIE/sk Striker from Rogue One.
It has movable print-in-place wings.
The scale is at 1:270 with a length of 63.6mm and a wingspan of 43mm. (The hinges are 2mm in diameter.)
Holder uses a small base and slanted pin from here.
Printed at 0.07mm layer height with supports on buildplate only. If you want to use the holder, use the .gcode-file with peg or add a slanted peg before slicing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
License:
Creative Commons — Attribution
DanielAlex
